I2C Circular LED Bar - RED

I2C Circular LED Bar - RED
  • I2C Circular LED Bar - RED
  • I2C Circular LED Bar - RED

I2C Circular LED Bar - RED

Code: MR400-013.1A
This board is equipped with a Circular LED Bar with 16 independent LEDs, each of which illuminates two segments of the bar, for a total of 32 segments, thanks to which you can give an aesthetic touch to your projects.

Description

 

I2C Circular LED Bar
RED LED

 

This board is equipped with a Circular LED Bar with 16 independent LEDs, each of which illuminates two segments of the bar, for a total of 32 segments, thanks to which you can make very eye-catching visual effects, and that will give an aesthetic touch to your projects.

Managing the LEDs is extremely simple thanks to the use of the controller PCA9635; it is a 16-channel LED driver with I2C communication.
On each output you can control the LED brightness via PWM signal with 8 bit resolution (256 steps). You can also define groups of LEDs on which to set the brightness again via PWM signal with 8 bit resolution (256 steps) or set the flash with frequency between 24Hz and 0.0932Hz (once every 10.73 seconds).
All LEDs of the group at the same time respond to the same command; this feature will reduce the I2C traffic.
After setting the desired status of each LED you can also apply a PWM signal on the Output Enable pin, this will allow you to adjust the brightness or flash the LEDs that are lit without the need for any further I2C communication.

Characteristics

Supply voltage +5V
Supply current 2.5mA typ. (10mA max.) (all LEDs off)
LEDs 16
Segments 32
Interface I2C
Operating temperature –40°C / +85°C
Dimensions 1.9” x 1.4”(48.3 x 35.6 mm)
Weight 0.37 oz (10.5g)

Downloads

 datasheet (english version)

 datasheet (italian version)

 PCA9635 Datasheet

Useful Links

Arduino library

Accessories

  1. 1
    5 pin Female Header 12" Cable for Arduino
    Code: MR008-001.1
    This 12" (300mm) long jumper cable is suitable to interface some of our products to an Arduino board.

Similar

  1. 1
    4-Digit Serial LED Display - RED digit
    Code: MR400-012.1A
    This board have a built-in 4-digit 7-segment LED display and it requires a minimum of only one I/O line to control it. It is possible to control the display through two different communication interfaces: Serial TTL or I2C
  2. 2
    4-Digit Serial LED Display - BLUE digit
    Code: MR400-012.1D
    This board have a built-in 4-digit 7-segment LED display and it requires a minimum of only one I/O line to control it. It is possible to control the display through two different communication interfaces: Serial TTL or I2C
  3. 3
    4-Digit Serial LED Display - GREEN digit
    Code: MR400-012.1B
    This board have a built-in 4-digit 7-segment LED display and it requires a minimum of only one I/O line to control it. It is possible to control the display through two different communication interfaces: Serial TTL or I2C
  4. 4
    I2C Circular LED Bar - BLUE
    Code: MR400-013.1D
    This board is equipped with a Circular LED Bar with 16 independent LEDs, each of which illuminates two segments of the bar, for a total of 32 segments, thanks to which you can give an aesthetic touch to your projects.
  5. 5
    I2C Circular LED Bar - YELLOW
    Code: MR400-013.1C
    This board is equipped with a Circular LED Bar with 16 independent LEDs, each of which illuminates two segments of the bar, for a total of 32 segments, thanks to which you can give an aesthetic touch to your projects.
  6. 6
    I2C Circular LED Bar - GREEN
    Code: MR400-013.1B
    This board is equipped with a Circular LED Bar with 16 independent LEDs, each of which illuminates two segments of the bar, for a total of 32 segments, thanks to which you can give an aesthetic touch to your projects.
  7. 7
    16x2 Character LCD Yellow-Green LED Backlight
    Code: MR400-001
    This is a basic 16 character by 2 line display. Black text on Green background with LED backlight. Utilizes the extremely common SPLC780D parallel interface chipset.
  8. 8
    16x2 Character LCD Blue LED Backlight
    Code: MR400-002
    This is a basic 16 character by 2 line display. White text on Blue background with LED backlight. Utilizes the extremely common SPLC780D parallel interface chipset.
  9. 9
    8x2 Character LCD Blue LED Backlight
    Code: MR400-016
    This is a basic 8 character by 2 lines display. White text on Blue background with LED backlight. Utilizes the extremely common SPLC780D parallel interface chipset.
  10. 10
    4-Digit Serial LED Display - YELLOW digit
    Code: MR400-012.1C
    This board have a built-in 4-digit 7-segment LED display and it requires a minimum of only one I/O line to control it. It is possible to control the display through two different communication interfaces: Serial TTL or I2C