This board is a breakout board for the DHT11 sensor and gives a digital output that is proportional to temperature and humidity measured by the sensor. Technology used to produce the DHT11 sensor grants high reliability, excellent long-term stability and very fast response time.
Each DHT11 element is accurately calibrated in the laboratory. Calibration coefficient is stored in the internal OTP memory and this value is used by the sensor’s internal signal detecting process. The single-wire serial interface makes the integration of this sensor in digital system quick and easy.
Sensor physical interfacing is realized through a 3-pin connector: +5V, GND and DATA. First two pins are power supply and ground and they are used to power the sensor, the third one is the sensor digital output signal.
Its small physical size (1.05”x0.7”) and its very light weight (just 0.1oz) make this board an ideal choice to implementing small robots and ambient monitoring systems.
|Supply current (running)||0.5mA typ. (2.5mA max.)|
|Supply current (stand-by)||100uA typ. (150uA max.)|
|Temperature range||0 / +50°C ±2°C|
|Humidity range||20-90%RH ±5%RH|
|Dimensions||1.05” x 0.7” (connectors excluded)|
|Weight||0.1 oz (2.7g)|
Code: MR008-002.1This 12" (300mm) long 3-pin JST cable is composed of 3 conductors with a 0.1" (2,54mm) spacing female socket on one end and a 3-pin JST connector on the other end; is suitable to interface many devices that have interconnections via JST header.
Code: MR003-001.2Extremely compact and light weight Digital Temperature Sensor, that use the famous Microchip's TCN75A sensor. It is capable of reading temperatures from -40°C to +125°C with a precision of 0.0625°C.